Last post in this series: mySentry Trial: Starting Up
I wore the pump for about a week before starting on a sensor. That time was used to become familiar with the basics of delivering insulin with a pump that was brand new to me. My sensor training went great, and without any trouble I was up and running.
I own a Dexcom SEVEN+ system (a different brand of CGM), and decided that I wanted to wear both devices to get a feel for how they compare. I didn’t do any scientific comparisons, I didn’t keep any detailed records, nothing fancy. Just anecdotal observations.
The first low I had while wearing both systems just about rocked my socks off. Lows are often unsettling, especially when right in the middle of something, and on top of that I had both devices buzzing and beeping at me. It was completely overwhelming, and I questioned whether I’d continue to wear them both.
But I did continue, and I discovered something very interesting. When one system was off (not matching up to actual blood sugar numbers), they were both off. So maybe perceived inaccuracies between brands of CGM technology actually come right back to something weird happening in the wearer’s interstitial fluid rather than either of the devices being wrong. That was a real eye-opener for me.
Inserting the Medtronic CGM sensor was surprisingly painless for me. During the course of twenty-plus sensors, there wasn’t a single one that hurt. This surprised me, because the needle (and the sensor, for that matter) are pretty big.
Actually, the needle is huge.
In this picture, you see the sensor and needle loaded into the Sen-serter, a spring-loaded sensor insertion device. For the record, I am a fan of spring-loaded insertion devices. I like that they help me with a quick insertion, something I’ve always had trouble with doing manually.
Again, I want to say that even though the needle is the largest I’ve seen/used, not a single insertion hurt. Not even a little bit. I had one that bled like crazy, but even that was pain-free.
The process after insertion was slightly confusing though. There is a 5-minute “wetting” period after insertion. What that means is that you have to wait for at least 5-minutes before plugging in the transmitter. Once plugged in, the clamshell is supposed to show a green light (that part is kind of cool. It seems the light is buried way inside, but still shows through the clamshell skin).
There were a couple of times where I didn’t get the green light, and I wasn’t sure why. I would disconnect the transmitter and try again, and then it seemed to work fine.
Calibration is also a bit harder (the system is less forgiving of blood sugar on the move). Jeff talks a lot about calibrating in his CGM post (a wealth of tips and knowledge), and something that Wil talks often about too. The post I’ve linked to for Wil is quite old, and many things have changed since, but still offers a lot of wisdom around calibration.
The CGM integration into the Medtronic pump felt very sophisticated compared to what I was used to with the Dexcom system. I could dig deeper into the historical data, I could see the amount of time left on the sensor, and I could see when the next calibration was due.
Queued data rocks. If the clamshell transmitter loses connection to the pump, it can store up to 40-minutes of CGM information. Once the communication is re-established, it back-fills all of that information into the pump. This was great for when I was taking a shower, or just after basketball when my pump is in my locker and I’m cleaning up. I had very few gaps in my CGM graphs.
Another thing I really enjoyed was the ability to silence alerts for a set period of time. I used this when I knew my CGM wasn’t tracking very well, and didn’t want to be pestered by any of the alerts. I could tell it to be quiet for whatever period of time I wanted, and it left me completely alone.
Wearing the System
Physically wearing the system proved to be more troublesome. Especially during basketball. I made a little video to explain.
I’ve never used more extra tape and crazy solutions to keep a CGM sensor in place. Ooh, wait. That’s a lie. I once used toupee glue to keep my Navigator sensors on. That probably deserves its own post…
These sensors are approved for three days, which feels really, really short. That being said, there are times where my Dexcom sensor itches so bad by day 5 or 6 that I’m ready for it to be gone.
And yes, I know that people restart their sensors. Officially I did no such thing. Unofficially? I couldn’t keep the damn things on long enough to do it. One or two basketball sessions and they were toast (clamshell flop).
Another thing I had trouble with is the holes they left in me. I don’t know if it’s due to the size of the sensor, or the clamshell flopping, or something else, but these things seemed to leave much bigger (and more irritated) holes in my stomach. In fact, the holes took longer to heal than the three days each sensor is approved for use. I know my stomach is no masterpiece, but it looked like it had been shot with a shotgun by the time I had used a couple months worth of sensors.
Last Two Small Irritations
I once got a CGM alert on the last screen of programming a meal bolus. After confirming the CGM alert, I had to start the whole bolus programming sequence over again. I know it’s not a big deal, but it bothered me enough to make a note of it.
In that same vein, when I got a CGM alert at night I would turn on the back-light to see what it was. After acknowledging the alert, the back-light turns off. I’d have to turn the back-light back on to program my correction bolus, or set a temporary rate, or whatever action needed doing. Again, a very small thing in the big picture, but it bothered me.
Last Two Large Concerns
The CGM alarms on the pump are way too quiet. Dangerously quiet. Can’t hear them at night quiet. This was one big concern that I heard from many readers. I didn’t hook up the MySentry device for a few days after starting the CGM, and many (most?) of the pump alarms without MySentry watching over them went unnoticed.
The last concern I have is all about the weak signal.
Weak signal, weak signal, weak signal, weak signal. All the time, weak signal.
With the transmitter on one side of my body, and the pump on the other side, weak signal. Talk about feeling fat. Holy crap. Feeling fat AND having a device beep at you all day to remind you of how fat you are. I’m not a fan.
I have never had to adjust my life to a diabetes device more than when I was wearing this system.
In my years of pumping I have found a “sweet spot” on my belt for my insulin pump. It’s become a part of my movements to keep that sweet spot out of harms way. When I get in the car and put my seatbelt on, the sweet spot is safe. When I am navigating tight spaces, I’m subconsciously aware of that sweet spot and keep it out of the way.
I had to change where I put my pump to accommodate the weak transmission of information between the transmitter and pump. It caused major disruption for me. Remember how I broke the belt clip in the last post? I wasn’t wearing my pump in the sweet spot because the transmitter couldn’t talk to it.
I should not have to adjust my lifestyle to accommodate a diabetes device.
When I play basketball there is one place where I feel my pump is safe. I wear it in a pouch on an elastic band that goes around my waist, and I position it specifically where I do because it is comfortable and safe. I got so many weak signal alarms during basketball that I had to use the “silence” feature I mentioned above. Sometimes the pump would be less than 18-inches away from the transmitter and still couldn’t communicate.
It made me feel so fat. Like I needed a satellite orbiting my stomach in order to relay information back and forth.
Final Thoughts & More to Come
I still have a lot more left to say on my trial. This post is, by far, the most critical and complaint-filled section of my review as a whole.
It sounds like I hated the system. Which I didn’t. There were certain aspects of the system that gave me a lot of trouble, but overall, I still liked the system. Stick with me, and I’ll cover those in detail in the next post or two.
Next post in this series: mySentry Trial: The mySentry Unit
I received all of the pump supplies, components, and training from Medtronic, free of charge. I was not asked to write or say anything about my experience, I was not given any limits around anything I did write or say. I did not receive any compensation other than the opportunity to try their products.
Support Scott’s Half MarathonI'm running a half marathon (!!) in June and I need YOUR support! Learn more...
Scott on Twitter
- @BeccaElizabethh @SweeterCherise @MHoskins2179 @txtngmypancreas @KellyRawlings @diabetesalish That would be awesome! & Thx for the RT! about 38 minutes ago in reply to BeccaElizabethh
- RT @txtngmypancreas: Twenty Eight. http://t.co/oyLepDihgO #dblog #diabetes #diaversary (Bonus points to anyone who finds the Easter Egg in … about 1 hour ago
2nd Annual Diabetes Hope Conference Registration Now Open
Click above to register, or learn more at
You gain strength, courage and confidence by every experience in which you really stop to look fear in the face. You are able to say to yourself, ‘I have lived through this horror. I can take the next thing that comes along.’ You must do the thing you think you cannot do.— Eleanor Roosevelt, “Hammer Time” on Alecia’s Blog
Subscribe to Scott via email
DisclaimerI am not a medical professional. Nothing on this site should be construed as medical advice. Your diabetes may vary. Contact your health care provider for specific questions.